If you wish to revert to stock firmware on your device, therefore you need to utilize with Intel Flash tool. Meanwhile, for a smartphone which is powered by Intel Mobile platform. Today we are going to share a bit of knowledge to help you with intel phone flash tool.

Intel Phone Flash Tool

Here is the list of the features

Application Installer

It was quite easy to run, directly launch the setup and follow the on-screen instruction.

Log Level

In case if you face any error while flashing the stock firmware on your device, there were a lot of multi-level logs already in-built the log feature in the device flash. Which means you have an error log so you can fix this, most likely to ben fatal logs includes a Warning Log, Info, Bedbug Logs and Trace Logs.

Inbuilt DFU Tool

You don’t require additional DFU Tool to flash, which gives easy access to flash the device which was powered by Broadcom chipset.

InBuilt Drivers

The latest version of the intel flash tool, whereas it means you don’t require an additional driver to be installed on your device.

Download Intel Phone Flash Tool


   DOWNLOAD Phone Flash Tool


Downlaod Phone Flash Tool


Downlaod Flash Tool

Download iSOC USB Driver

You need to download file on your computer, and then you require to simply on your computer.

Download iSOC USB Driver

How to use Intel Phone Flash Tool to flash stock ROM

It was quite easy to download and then fash using the Intel Phone flash tool. Follow the following steps carefully.


You need to have at least 40% between 50% of battery, to flash or install.

  1. First thing first, you need to download and install the Android USB Driver on your computer.
  2. After that, install the iSOC USB Driver on your computer.
  3. Now, download your choice of ROMS, or Stock ROMs (Firmware) and then likely to go and download and install intel fash tool on your device.
  4. Once, it installs on your device and then opens the browse button placed on the upper right corner of the device.
  5. Meanwhile, you need to navigate to the flash.xml file and then connect your device through USB.
  6. Not to mention, your device should power off and click on the start to flash to start.
  7. once it a success, you simply need to disconnect and restart your device.
  8. That’s it. Enjoy your device.

We would like to know your valuable opinion and feedback if there is any query share with us in the comment section down below. Stay tuned for more further updates in future on same. Stay tuned for more further update In future on same.