Asus Flash Tool use to flash stock firmware on your Smartphone. So, Today we guide ” How to Flash your Device by using the Flash tool.
Basic Pre-Requirements
- Unlock the Asus Smartphone Bootloader, and Setup instructions can be found on
–Quick Disclaimer- Your device data will be erased.
- Charge your devices at least above 60%
- 1x USB Cable and 1X Pc/MacBook
- 1 x Flash tool
- Then, Download and Manually Install Android USB Drivers on your PC
How To Flash Asus Devices By Asus Flash Tool
- First, Download and install the Asus Flash Tool on your Window.
- Now, Download and install the USB driver on your Windows PC.
- Then, Download and Extract the Stock Firmware (Flash File) in AFT.zip File
- Now, Extract the Flash tool and After open the Flash Tool.
- Once Asus Flash to Open, you will see the Disconnected Option and Click it to Connect your Smartphone.
- Turn off the Asus Smartphone > Press and Hold Power and Volume Down key at the same time to enter the fastboot mode.
- After that, Connect your Smartphone to the Computer using the USB cable:
- Now, Click the Browse Button and Select your Located Firmware.
- Now, Click on the Start button to flash your smartphone
- Once the flashing or installation process is completed.
- You will be displayed Flashing Completed message on the tool {Flash Tool Success}
- Congratulations, you have Successfully Flash Asus device with the Flash tool.
- Then After Disconnect the device and Restart it.
Hopefully, we believe you have successfully Successfully Flash Asus device by the Asus Flash tool. Thanks for being with us. Don’t forget to share the bugs, so we can share them with developers to fix those issues in the comment section down below.