Oppo upcoming premium flagship smartphone, the Oppo Reno 4 series. Whereas the device is going to have come with a MediaTek first Dimensity 800U SoC. The device seems to be quite promising, so let’s take a closer look at the device and know more about it.

Oppo Reno 4 series highlights

The device has been appearing on TENAA certification authority with the internal model number Oppo PEAM00 and PEAT00. Therefore, the device will come with a 6.43-inch OLED display panel featuring a punch-hole camera cutout placed on the upper left corner of the device. Likely, the device to include a Full HD+ (1080 x 2400 pixel resolution) alongside a 20:9 aspect ratio. Not to mention, the device is going to be packed an optical in-display fingerprint scanner so far.

Furthermore, to power, the device is going to be equipped with a 4300mAh battery using a 65W of fast charging solution bundled in the box. According to reports, the device is expected to be launch in the early weeks of August. In terms of camera performance, the device is going to become with a triple rear camera module in square camera setup housing a 48MP primary + 8MP ultra-wide-angle lens + 2MP Depth sensor.

Therefore, the dimension of the device was measured as 160.5×73.9×7.85mm, and the weight was 169 grams. Under the hood, the device is going to be powered by PEAM00/ PEAT00 BASED ON 2.0GHz octa-core CPU. The chipset of the device paired with an 8GB of Ram and 256GB of onboard storage. The device has been running on Android 10 based custom skin ColorOS 7 out of the box.

Thanks for being with us. We would like to know your valuable opinion and feedback if there is any query share with us in the comment section down below. Stay tuned for more further updates in the future on the same.