What is TWRP

TWRP Stand For Team Win Recovery. The Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which functions often unsupported by stock recovery images. You can easily root and unroot Devices.


Get Ready to Install TWRP Recovery on Techno Spark Go

Your device must have the bootloader unlocked. Install TWRP Recovery on Techno Spark Go and Easy to Root and Unroot Your Device.

Techno Spark Go Information

Techno Spark Go Plus comes with the latest MediaTek Helio A22 (MT6761) Soc Coupled With 2GB of RAM and 32GB of Onboard Storage. However, The Chipset is a Quad-Core CPU set to clock a maximum of 2.0GHz. Further, you can expand your storage using a MicroSD Card up to 128GB.

In terms of the camera, Techno Spark Go Pus single rear 8MP Primary with a Dual LED Flash. While the front has an 8MP 81°FoV Selfie sensor along with a dedicated Selfie Flash.



Techno Spark Go plus 6.25-Inch Display With a 720x1600pixel resolution of a 20:9 aspect ratio. It achieves an 89.5% Screen-to-body ratio and has a maximum brightness of 480nits. Techno Spark Go Plus comes with a massive 4000mAh battery. The device also features a Rear Mounted fingerprint scanner.

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Techno Spark Go. You are responsible for any mistake and following flashing guide the files. Some functions don’t operate properly and can cause serious damage to your device.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Techno Spark Go
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the bootloader of  Techno Spark Go: Follow this Guide to unlock the bootloader.
    Quick Disclaimer
    Then, Download and Manually Install Android USB Drivers on your PC
  4. Additionally,  Download TWRP of Techno Spark Go



How to install TWRP on Techno Spark Go

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using power off your device and then hold the Volume Down + Power button
  4. Now, Open the Adb Folder On your pc and Laptop
  5. Then, Select the Address Bar of Adb File
  6. Type Cmd and hit the Enter button
  7. Types the command in Cmd (Inside “Filename,” You can drag the file directly to the CMD instead of Typing.)
  • Fastboot Devices
  • fastboot Flash Recovery then Type “TWRP filename.img” and Hit Enter
  • fastboot boot then Type “TWRP fileName.img” (using Drag and Drop on Cmd)

Congratulation, you are successfully installed TWRP File on Techno Spark Go

How to Root Techno Spark Go

There are two Methods to Root You Techno Spark Go

  • By using SuperSU Zip
  • By Using Download Magisk Zip

Using SuperSU Zip

  1.  Download SuperSU Zip  and Download No verity opt encrypt.zip and Movie to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. In TWRP Recovery Go to Android Backup
  5. TWRP Recovery, Select INSTALL
  6. Then Browse and Select the saved file of  SuperSU Zip
  7. Now Click Install Button
  8. Again go to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  9. Finally, Reboot Your Device
  10. Congratulation, you successfully Rooted your Device


By Using Download Magisk Zip

  1.  Download Magisk Zip and Download No verity opt encrypt.zip and Movie to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. TWRP Recovery, Select INSTALL
  5. Then Browse and Select the saved file of  SuperSU Zip
  6. Now Click Install Button
  7. Again go to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  8. Finally, Reboot Your Device
  9. Congratulation, you successfully Rooted your Device

Read Also: How to Install TWRP Recovery and Root Xiaomi Mi 10 | Guide

Hopefully, We assume that this article remains informative for you, and You have successfully created a TWRP Recovery and Root Techno Spark Go on your device. Thanks for being with us, share your more valuable feedback and opinion. If any queries, let us know in the comment section down below.