back to top

How to Unbrick Motorola Moto G54 5G: Step-by-Step Guide

Follow Us
placeholder text

If your Motorola Moto G54 5G is soft-bricked, stuck in a boot loop, or even hard-bricked, the solution seems to be difficult, but tools and procedures will allow your device to get back into normal condition. This guide contains the directions that you need to unbrick the Moto G54 5G so that you can enjoy it again. Please note that the procedure to unbrick involves data loss and must be executed step by step without any skipping of steps.

Understanding Bricking and Unbricking on the Moto G54 5G

The Motorola Moto G54 5G being a widely loved device among all its features compels specific hardware and software development and unbricking to succeed with its Mediatek chipset. Nevertheless, custom development, coupled with restricted ROMs, workarounds, and an extra-EDL-free mode make things worse. However, there is luckily a good way to unbrick both the soft and hard-bricked devices available here.

Important Notes Before Proceeding

  • Data Loss: All information on your device will be erased in the process.
  • Responsibility: In case of any issues, such as a device malfunction or data loss, which might occur, we are not responsible for that.
  • Necessary Tools: Ensure all required files are downloaded and accessible on your computer.

Required Tools and Downloads

You should first download and set the below tools:

  • Blankflash: This is a key point to a dead-bricked device.
  • MTK Preloader Drivers: The primary reason for the smooth PC discovery of this prebuilt method is the uploading of media via the dongle.
  • Tiny Fastboot Drivers: Critical when the device is in Fastboot mode.
  • Android SDK Platform Tools: It offers command-line tools for Android debugging and flashing.

Step 1: Setting Up the Drivers and Files

The first step to unbricking a system consists of the installation of drivers and files. You are required to do this:

  1. Extract Files: Files should be organized in a convenient location where they can be simply accessed.
  2. Install MTK Preloader Drivers:
    • Open the “MTK Preloader drivers” folder.
    • Run the “InstallDriver.exe” file and follow the on-screen instructions to install.
  3. Prepare Blankflash File:
    • Navigate to the “blankflash” folder.
    • Run the “blank-flash.bat” file. If prompted with missing DLL errors, download the required DLL files from a reliable source.

Step 2: Enter Flash Mode on the Moto G54 5G

To perform the flashing Moto G54 must be able to flash. Here are the guidelines by which you should follow:

  1. Power Off the Device:
    • Press and hold Volume Up, Volume Down, and Power simultaneously.
    • Wait for the flashlight to blink, indicating that the device has powered off.
  2. Connect the Device to the Computer:
    • Plug the Moto G54 5G into your computer using a USB cable. If everything is set up correctly, flashing will begin automatically.
  3. Access Fastboot Mode:
    • After flashing, the device will boot into Fastboot Mode. If it does not, repeat the steps above.

Step 3: Download and Flash Stock Firmware

To perform the unbricking effectively, you must restart the stock firmware of your Motorola G54 5G, which can be done using the following steps.

Download Files

Blankflash
Preload Drivers
Tiny Fastboot Drivers
Android SDK Platform Tools
  1. Download Stock Firmware:
    • Locate the stock firmware for the Motorola Moto G54 5G from a reputable source and download it. Make sure the firmware version corresponds to your device’s model.
  2. Unzip Tiny Fastboot Script:
    • Unzip the Tiny-Fastboot-Script.zip file.
    • You should see the flash.bat file and a tools folder.
  3. Prepare Files for Flashing:
    • Transfer the flash.bat file and tools folder into the firmware folder obtained from extraction.

Step 4: Run the Firmware Flash

At this stage, since the files are in place, the firmware flash process could be now launched:

  • Run flash.bat:
    • Double-click the flash.bat file, the device recovery software will execute it automatically.
    • Pick the preferred version of Fastboot. In case you are uncertain, choose the default variant.
  • Complete the Flashing Process:
    • The process of flashing will last for a while. Just be patient and wait for it to finish.
  • Device Boot to OS:
    • Once the flash is over the phone should boot automatically through the OS which means the factory settings have been restored.

Troubleshooting Common Issues

  • Missing DLL Files: In the case of some DLL files that are not available for download in Blankflash, download them one by one from a trustworthy DLL site.
  • Device Not Recognized: Make sure, MTK Preloader Drivers are installed properly because they are necessary for your PC to recognize the device in flash mode.
  • Stuck in Bootloop After Flashing: If your Moto G54 is still in a boot loop after flash, just repeat the whole process with a verified stock firmware file.

Conclusion

Thus, if your Motorola Moto G54 5G is soft-bricked, stuck in a boot loop, or hard-bricked, follow these steps and you will be able to successfully unbrick it. Make sure that every step is done right, and be careful working with drivers or firmware files. If the problems keep occurring, you could ask for help in other support forums or you could even consult a professional.