Advertisements

What is TWRP

TWRP Stand For Team Win Recovery. The Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which often functions unsupported by stock recovery images. You can easily root and unroot devices.


Get Ready to Install TWRP Recovery on Redmi K30 Pro

Your Device must have the bootloader unlocked. Install TWRP Recovery on Redmi K30 Pro and Easy to Root and Unroot Your Device.

Redmi K30 Pro Information

The Device has powered by a Qualcomm snapdragon 865 Soc. The Chipset is coupled with Up to 8GB of LPDDR5X RAm and 256GB UFS 3.1 storage on-board. It runs the Latest ZTE’s own MIUI 11 based on Android 10 out of the Box.

In terms of the Camera, This Device has come with a Quad Camera setup on the Rear Panel Using with 64MP Sony IMX686 primary sensor, an 13MP Ultra-wide sensor for 123 Degree (FOV),  5MP Micro Sensor, and last 2MP Depth Sensor. For the Front, there is a 20MP Pop-up Selfie Camera for Video calls and Capture a beautiful Picture.

It Features to 6.67-inch FHD+ notch-less Super AMOLED display with HDR10+ support. It has a Touch sampling rate of 180Hz. To be clear, the phone only supports a 60Hz refresh rate. Moreover, this Device is packed with a massive 4,700mAh battery and support 33W fast charging



Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Losing data on your Redmi K30 Pro. If you are responsible for any mistakes, follow the flashing guide for the files. Some functions don’t operate properly and can cause serious damage to your Device.

Basic Pre-Requirements

  1. Enable USB Debugging on your Redmi K30 Pro
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the bootloader of  Redmi K30 Pro: Follow this Guide to unlock the bootloader.
    Quick Disclaimer
    Then, Download and Manually Install Android USB Drivers on your PC
  4. Additionally,  Download TWRP of Redmi K30 Pro

How to install TWRP on Redmi K30 Pro

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using power off your Device and then hold the Volume Down + Power button
  4. Now, Open the ADB folder on your PC and Laptop
  5. Then, Select the Address Bar in the ADB File
  6. Type Cmd and hit the Enter button
  7. Type the command in Cmd (Inside “Filename,” You can drag the file directly to the CMD instead of Typing.)
  • Fastboot Flash Recovery then Type “TWRP file name.img” and Hit Enter
  • Fastboot boot then Type “TWRP FileName.img” (Using Drag and Drop on Cmd)

Congratulations, you have successfully installed the TWRP File on Redmi K30 Pro

How to Root Redmi K30 Pro

There are two Methods to Root Your Redmi K30 Pro

  • By using SuperSU Zip
  • By Using Download Magisk Zip

Using SuperSU Zip

  1.  Download SuperSU Zip and Download No verity opt encrypt.zip and Move to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. Please Take Android Backup Before
  5. For TWRP Recovery,
  6. TWRP Recovery, Select INSTALL
  7. Then Browse and Select the saved file of  SuperSU Zip
  8. Now Click Install Button
  9. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  10. Finally, Reboot Your Device
  11. Congratulations, you successfully Rooted your Device


By Using Download Magisk Zip

  1.  Download Magisk Zip and Download No verity opt encrypt.zip and Move to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. TWRP Recovery, Select INSTALL
  5. Then Browse and Select the saved file of  SuperSU Zip
  6. Now Click Install Button
  7. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  8. Finally, Reboot Your Device
  9. Congratulations, you successfully Rooted your Device

Read Also: How to Install TWRP Recovery and Root Xiaomi Mi 10 | Guide

Hopefully, We assume that this article remains informative for you, and you have successfully created a TWRP Recovery and Root Redmi K30 Pro on your Device. Thanks for being with us and sharing your more valuable feedback and opinion. If any queries, please let us know in the comment section down below.

x
Advertisements