What is TWRP

TWRP Stands for Team Win Recovery. The Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which often functions unsupported by stock recovery images. You can easily root and unroot devices.

Get Ready to Install TWRP Recovery on Redmi 10x 4G.

Your Device must have the bootloader unlocked. Install TWRP Recovery on Redmi 10x 4G and Easy to Root and Unroot Your Device.

Redmi 10x 4G Information

DeviceRedmi 10x 4G
Processor MediaTek Helio G85 (12nm)
RAM/ROM128GB+4GB RAM, 128GB+6GB RAM
Screen6.53 inches with 1080 x 2340 pixels
Battery5,020 mAh battery with 18W fast charging
Camera48MP+8MP+2MP+2MP Rear, 13MP Selfie
Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Losing data on your Redmi 10x 4G. If you are responsible for any mistakes, follow the flashing guide for the files. Some functions don’t operate properly and can cause serious damage to your Device.

Basic Pre-Requirements

  1. Enable USB Debugging on your Redmi 10x 4G
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the bootloader of  Redmi 10x 4G: Follow this GuideGuide to unlock the bootloader.
    Quick Disclaimer
    Then, Download and Manually Install Android USB Drivers on your PC
  4. Additionally,  Download TWRP of Redmi 10x 4G

How to install TWRP on Redmi 10x 4G

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using power off your device and then hold the Volume Down + Power button
  4. Now, Open the ADB folder on your PC and Laptop.
  5. Then, Select the Address Bar in the ADB File
  6. Type Cmd and hit the Enter button
  7. Type the command in Cmd (Inside “Filename,” You can drag the file directly to the CMD instead of Typing.)
  • adb Reboot Bootloader
  • Fastboot Devices
  • Fastboot Flash Recovery “TWRP filename.img” and Hit Enter
  • Then After Type “Fastboot reboot” and Hit Enter.

Congratulations, you have successfully installed the TWRP File on Redmi 10x 4G

How to Root Redmi 10x 4G

There are two Methods to Root Your Redmi 10x 4G

  • By using SuperSU Zip
  • By Using Download Magisk Zip

Using SuperSU Zip

  1.  Download SuperSU Zip and Download No verity opt encrypt.zip and Move to Mobile Storage.
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. Please Take Android Backup Before
  5. For TWRP Recovery,
  6. TWRP Recovery, Select INSTALL
  7. Then Browse and Select the saved file of  SuperSU Zip.
  8. Now Click Install Button
  9. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm the install.
  10. Finally, Reboot Your Device
  11. Congratulations, you successfully Rooted your Device.

By Using Download Magisk Zip

  1.  Download Magisk Zip and Download No verity opt encrypt.zip and Move to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. TWRP Recovery, Select INSTALL
  5. Then Browse and Select the saved file of  SuperSU Zip
  6. Now Click Install Button
  7. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  8. Finally, Reboot Your Device
  9. Congratulations, you successfully Rooted your Device

Read Also: How to Install TWRP Recovery and Root Xiaomi Mi 10 | Guide

Hopefully, We assume that this article remains informative for you, and you have successfully created a TWRP Recovery and Root Redmi 10x 4G on your Device. Thanks for being with us and sharing your more valuable feedback and opinion. If you have any queries, please let us know in the comment section down below.