Advertisements

What is TWRP

TWRP Stands for Team Win Recovery. The Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which often functions unsupported by stock recovery images. You can easily root and unroot devices.


Get Ready to Install TWRP Recovery on Huawei Mediapad M3

Your Device must have the bootloader unlocked. Install TWRP Recovery on Huawei Mediapad M3 and Easy to Root and Unroot Your Device.

Huawei Mediapad M3 Information

It features to 8.4 ” IPS LCD Display with the 2,560x1600px resolution. This Device is Powered by a Kirin 950 Octa-core Processor. This Chipset, Coupled with up to 6GB of RAM and 64GB of Storage On-board. It runs the latest Android 6.0 out of the Box.



Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Losing data on your Huawei Mediapad M3. If you are responsible for any mistakes, follow the flashing guide for the files. Some functions don’t operate properly and can cause serious damage to your Device.

Basic Pre-Requirements

  1. Enable USB Debugging on your Huawei Mediapad M3
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the bootloader of  Huawei Mediapad M3: Follow this Guide to unlock the bootloader.
    Quick Disclaimer
    Then, Download and Manually Install Android USB Drivers on your PC
  4. Additionally,  Download TWRP of Huawei Mediapad M3

How to Install TWRP on Huawei Mediapad M3

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Use power off your DeviceDevice and then hold the Volume Down + Power button
  4. Now, open the ADB folder on your PC and Laptop
  5. Then, select the Address Bar in the ADB File
  6. Type Cmd and hit the Enter button
  7. Type the command in Cmd (Inside “Filename,” You can drag the file directly to the CMD instead of Typing.)
  • adb Reboot Bootloader
  • Fastboot Devices
  • Fastboot Flash Recovery “TWRP filename.img” and Hit Enter
  • Then After, Type “Fastboot reboot” and Hit Enter

Congratulations, you have successfully installed the TWRP File on Huawei Mediapad M3

How to Root Huawei Mediapad M3

There are two Methods to Root Your Huawei Mediapad M3

  • By using SuperSU Zip
  • By Using Download Magisk Zip

Using SuperSU Zip

  1.  Download SuperSU Zip and Download No verity opt encrypt.zip and Move to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. Please Take Android Backup Before
  5. For TWRP Recovery,
  6. TWRP Recovery, Select INSTALL
  7. Then Browse and Select the saved file of SuperSU Zip
  8. Now Click Install Button
  9. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  10. Finally, Reboot Your Device
  11. Congratulations, you successfully Rooted your Device


By Using Download Magisk Zip

  1.  Download Magisk Zip and Download No verity opt encrypt.zip and Move to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. TWRP Recovery, Select INSTALL
  5. Then Browse and Select the saved file of  SuperSU Zip
  6. Now Click Install Button
  7. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  8. Finally, Reboot Your Device
  9. Congratulations, you successfully Rooted your Device

Read Also: How to Download and Install TWRP Recovery Xiaomi Mi A1 | Guide

Hopefully, We assume that this article remains informative for you, and you have successfully created a TWRP Recovery and Root Huawei Mediapad M3 on your Device. Thanks for being with us and sharing your more valuable feedback and opinion. If you have any queries, please let us know in the comment section down below.

x
Advertisements