Recovery

How to download and Install TWRP Recovery For Blackview A30 | Guide 

What is TWRP

TWRP Stand For Team Win Recovery. Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which is functions often unsupported by stock recovery images. You easy to root and Unroot Devices.




Get Ready to Install TWRP on Blackview A30

Your device must have the bootloader unlocked. Install TWRP on Blackview A30

Blackview A30 Information

Blackview A30 has powered by Quad-Core, 1.3 GHz MediaTek MT6580. This chipset, Coupled with 2GB of RAM and 16GB of storage on-board. It features to 5.5” Display and Dual Rear Camera Setup using With 8MP+5MP and 5MP single Selfie Camera. It has a 2,500mAh battery with a MicroUSB port.

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Meizu 16XS. You are responsible for any mistake and following flashing guide the files. Some functions don’t operate properly and can cause serious damage to your device.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Blackview A30
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the bootloader of  Blackview A30: Follow this guide to unlock the bootloader.
    Quick Disclaimer
    Then, Download and Manually Install Android USB Drivers on your PC
  4. Additionally,  Download TWRP of Blackview A30



How to install TWRP on Blackview A30

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using Power off your device and then hold the Volume Down + Power button
  4. Now, Open the Adb Folder on your PC and Laptop
  5. Then, Select the Address Bar of Adb File
  6. Type Cmd and hit the Enter button
  7. Types the command in Cmd (Inside “Filename”, You can drag the file directly to the CMD instead of Typing.)
  • Fastboot Devices
  • fastboot Flash Recovery then Type “TWRP filename.img” and Hit Enter
  • fastboot boot then Type “TWRP fileName.img” (using Drag and Drop on Cmd)

Congratulations, you have successfully installed TWRP File on Blackview A30

How to Root Blackview A30

There are two Method to Root You Blackview A30

  • By using SuperSU Zip
  • By Using Download Magisk Zip

 

Using SuperSU Zip

  1.  Download SuperSU Zip  and Download No verity opt encrypt.zip and Movie to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. For TWRP Recovery, Go to Android Backup
  5. TWRP Recovery, Select INSTALL
  6. Then Browse and Select the saved file of  SuperSU Zip
  7. Now Click Install Button
  8. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  9. Finally, Reboot Your Device
  10. Congratulations, you successfully Rooted your Device




By Using Download Magisk Zip

  1.  Download Magisk Zip and Download No verity opt encrypt.zip and Movie to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. TWRP Recovery, Select INSTALL
  5. Then Browse and Select the saved file of  SuperSU Zip
  6. Now Click Install Button
  7. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  8. Finally, Reboot Your Device
  9. Congratulations, you successfully Rooted your Device

Read Also: HOW TO DOWNLOAD AND INSTALL LINEAGE OS 17.1 FOR MOTO G7 PLAY | GUIDE

Hopefully, we assume that this article remains informative for you and you have successfully created a TWRP Recovery and Root Blackview A30 on your device. Thanks for being with us and sharing your more valuable feedback and opinion if any query lets us know in the comment section down below.

Related posts

Leave a Reply

Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.