Xiaomi operates a feature-rich HyperOS, yet a lot of users still desire the smoothness of Apple’s iOS Control Center. By implementing some tweaks, you can introduce the iOS 18 Control Center on your Xiaomi phone running HyperOS. This guide will lead you through the whole process in a very comprehensive way, ensuring that there are no stairs in the installation process. Closely follow the instructions and effortfully the score iOS 18 Control Center could be a reality for your Xiaomi device.
Disposition: Practice always the procedure of backup your data, every time, before moving forward. The steps mentioned next are the ones that are used for advanced modifications, and as such we are not responsible for any sort of damage or data loss that might result from these modifications.
Initial Condition: What You Must Have to Begin
Before the installation, ascertain to have the things as follows:
- A Xiaomi device that has the most recent HyperOS up to date.
- A stable internet connection for downloading the necessary files.
- A backup of all your data.
- Firsthand introduction to root processes and other modifications.
- Unlocked Bootloader: This is very important when carrying out the root and flashing procedures.
- Rooting Tools: Applications like Magisk, KernelSU, or APatch will be used for rooting.
Step 1: Bootloader Unlocking
The first thing to do to customize your Xiaomi HyperOS by installing iOS 18 Control Center is to unlock the bootloader. Read over this simple step-by-step guide:
- Download Mi Unlock Tool: Go to the official Xiaomi website and download the Mi Unlock Tool.
- Turn on Developer Options: Click Settings > About Phone and press MIUI version seven times until a message tells you that you are a developer.
- To enable OEM Unlocking, first, you need to visit Settings > Additional Settings > Developer Options and push the button OEM Unlocking.
- Mi Unlock Tool: Connect your phone to a PC using a USB cable and then run the Mi Unlock Tool software. Login to your Mi account, and then, you will get the on-screen steps to succeed in bootloader unlocking.
Note: When you unlock the bootloader, you will lose all data on your device. Remember to make sure it is backed up all the way.
Step 2: Rooting Your Device with Magisk
As for Magisk it does allow us to the device root functionality if we have already unlocked the bootloader before. Rooting refers to getting the root access on your mobile operating system by making some fundamental changes to the system.
- Download the Latest Magisk APK: Download the APK from the official repository on GitHub.
- Root Boot Image: Launch the application, press the Install button and then click the Select and Patch a File option. Choose the boot.img file for your phone model.
- Flash Patched Boot Image: To start, you must download the patched boot image to one of your computer’s drives. Subsequently, execute the ADB commands and input the following code to flash it:
adb reboot bootloader
fastboot flash boot patched_boot.img
fastboot reboot- Check for Root: Open the Magisk app and choose whether the device has been rooted or not when it appears.
Step 3: Installing LSPosed Framework
To have the customizations, such as Control Center, your phone needs the LSPosed Framework. Proceed as follows:
- Download LSPosed ZIP: You must, naturally, have to download the DLS-laced zip from LSPosed’s official source.
- Flashing LSPosed via Magisk: Open the Magisk shell, navigate to the modules of Grand Unified Bootloader and select the LSPosed ZIP file.
- Restart Device: Prob’em device you are trying to get into LSPosed onto by pressing the power button once or twice (boot.img) will do it for you
Step 4: Setting Up the HyperCeiler Module
The module HyperCeiler is the module required to integrate the iOS Control Center into Xiaomi’s HyperOS. The steps are as follows:
- Download HyperCeiler’s Module: Look for the module one a trusted XDA Developers thread.
- HyperCeiler Installed: First of all, in the LSPosed app, navigate to Modules and add the HyperCeiler module.
- Configure Faultbuster: Turn on the mod and make the necessary adjustments.
- To reboot the device: Restart your phone to refresh the HyperCeiler Module Settings.
Step 5: Configuring Cemiulier Settings
Once you have the required modules installed, you should configure the Cemiulier settings to ensure a smooth link between iOS elements and HyperOS.
- Get inside LSPosed and move over to the Cemiulier module.
- Activate the Following Options: Disable Digest VerificationBypass Shared User Signature VerificationDisable Compare SignaturesEnhanced Mode
- Turn Off Digest Verification
- By Passing Shared User Signature Verification
- Turn Off Compare Signatures
- Higher Mode
Tip: This setting is useful for skipping signature checks, which assists in ensuring that iOS components will integrate smoothly.
Step 6: Flash the APK Protection Patch Module
Your device can only use HyperOS 18 and up, and if it were one of the phones Xiaomi created, you would have to flash the module for the iOS 18 Control Center to work well.
- Download the APK Protection Patch Module.
- Install via Magisk: Through Magisk, navigate Modules, and select the APK Protection Patch Module.
- Reboot Device: Restart is required to patch the system.
Step 7: Downloading and Flashing the iOS 18 Control Center APK
This is the stage you will be directed into the installation of the iOS 18 Control Centre and therefore be the time when you will be assured that the iOS-styled device will come true.
- Download iOS 18 Control Center APK: Get the APK file from a reliable source.
- Paytm app APK download is the APK via Magisk: Go to Magisk > Modules and select the downloaded APK.
- Restart Your Device: Unplug, wait, then plug your phone to finish the installation.
Step 8: Finalizing the Installation
When the device is restarted, iOS 18 Control Center will be on the Settings system page. These are the operations that can be performed and checked:
- Swipe Down: Bring Control Center: you have the opportunity to slide your finger from the right side of the top of the screen, at the top of the screen, to the end of the screen and launch the iOS-style Control Center which would look like a Samsung.
- Customize Options: You are now able to select different features such as shortcuts within the Control Center in order to make the new system Control Center more comfortable for you.
- Test Functionality: One requirement is that there should not be some functions that you will need to run. Everything should still be running properly and look as smooth as a nav bar, display brightness adjustment, and media control.
Troubleshooting Common Issues
Issue 1: Device Stuck in Bootloop
- Solution: The original boot image can be flashed using ADB in recovery mode. Additionally, Magisk and the necessary modules in the phone have to be re-installed.
Issue 2: LSPosed Module Not Detected
- Solution: Turn on and off your device to flash the correct LSPosed through Magisk and make sure you have the right version suitable for the HyperOS that your device is running on.
Issue 3: Control Center Not Displaying Properly
- Solution: Try to adjust the settings that maybe Cemiulier and make sure all the options are checked on the proper on position. If this is the case and the matter is still there, the HyperCeiler needs to be re-installed.
Conclusion
The previous section provided, you can install the iOS 18 Control Center on your Xiaomi device running HyperOS by performing the steps written above. It is actually a kind of a unique combination of software from both Xiaomi and iPhone that a user champions and thereby can end up by clearing the existing launchers. By adhering to the use of a certified app from the app stores and accurately following set up instructions, the situation can be made stress-free. Furthermore, the user can look to the troubleshooting section for the answer to the problems or search the internet for information.
You are enabled to change the look of your Xiaomi to be similar to the iPhone by the use of the Control Center of iOS 18 which also goes beyond by being much more attractive and almost impeccable in design.