Lineage OS is a popular custom ROM and is supported by several devices across the globe. They are one of the most popular firmware distribution communities that give users to boost performance and deliver a stock Android.

Whereas if you are wondering why we need a custom ROM if we already have the OS provided by the manufacturer. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Many people were excited to experience the latest Android Version.

Lineage OS finally extended the support for some new devices, including the Google Nexus 6 (shamu). Today we are going to help you with this Complete guide to download and install custom ROM on your Google Nexus 6 (shamu).

Noteworthy: LineageOS 17.1 for Google Nexus 6 (shamu)

This guide helps you to enhance your android experience with LineageOS. We are going to share your complete guide alongside download link, Even we also mention the requirements and steps to the installation process.

Get Ready to Install the LineageOS 17.1

It is important that your device should have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed LineageOS for Google Nexus 6 (shamu).

How to install LineageOS 17.1 for Google Nexus 6 (shamu)

We recommend you to an instant complete article before you install LineageOS on your Google Nexus 6 (shamu). So you would not face any problems while installing LineageOS.

About Google Nexus 6 (shamu)

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Google Nexus 6 (shamu). You are responsible for any mistake and following flashing guide the files. There were some functions that don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Check Your Smartphone Supports Project Treble

  • Download and Install the checks the compatibility of project treble. Download Here
  • Now, Run the app
  • If you are green in the test then you are good to go
  • Also, see if you are green for the seamless system update otherwise you cannot proceed to install this ROM.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Google Nexus 6 (shamu).
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the Google Nexus 6 (shamu) Bootloader and Setup instructions.
  4. Then, Download and Manually Install Android USB Drivers on your PC

    Additionally, Download LineageOS 17.1 ROM

  5. Lastly, Gapps For LineageOS 17.1 [Android 10] ♠ ARM: Download Open Gapps 10 ARM Zip
    ♠ ARM64: Download Open Gapps 10 ARM64 Zip
    ♣ BiTGApps_Q_System.zip | Download
  6. Download Latest TWRP Recovery [NOTE: Recovery ROM was mentioned in front of Custom ROM.]. Download Here 
    How to install TWRP Recovery
  7. That’s it, and you have finished the download files that you have to flash or install on your device.

How to Unlock Bootloader on Google Nexus 6 (shamu)

  1. Start with Enabling Developer mode On Google Nexus 6 (shamu)
  2. Open setting on your Mobile, and select “About.”
  3. Tap seven times on “Build number.”
  4. Go Back to Settings, And Search “Developer option” and Open It.
  5. Now, Enable OEM Unlock and power Off your mobile.
  6. Now, open your smartphone into a Download mode by pressing and holding the volume down button and power button.
  7. After that, a long-pressing Volume down button.
  8. This Process will unlock your bootloader
  9. you have success full unlock the bootloader

Here is the guide to follow the instructions

  1. You need to Reboot your Device in TWRP Mode
    BOOT MODES
    • For Recovery
      First Power off your device and then hold the Volume Down + Power button, then navigate using volume rocker.
  2. In TWRP Mode,
  3. Then, Wipe cache, Data and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, then you have to reboot the recovery, or you might get an error/issue.)
  4. Now, Click Install and Flash LineageOS 17.1 on your Device
  5. Now, follow the same steps to install Lineage OS 17.1 GApps on your device.
  6. Reboot your Google Nexus 6 (shamu) again
  7. That’s it, and You can now enjoy the LineageOS 17.1.

Hopefully, We believe you have successfully installed the LineageOS 17.1 on your Google Nexus 6 (shamu). Thanks for being with us. Don’t forget to share the bugs, So we can share with developers to fix those issues in the comment section down below.