ArrowOS is a popular custom ROM and is supported by several devices across the globe. They are among the most popular firmware distribution communities that boost performance and deliver a stock Android. Today We Guide “How to Download and Install ArrowOS 11 on Poco F1 (Android 11)”

Whereas if you wonder why we need a custom ROM if we already have the manufacturer’s OS. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Several people were excited to experience the latest Android Version.

ArrowOS finally extended the support for some new devices, including the POCO F1. Today we will help you with this Complete guide to download and install ArrowOS 18.0 for POCO F1 with Android 11.

Noteworthy: ArrowOS 11 for POCO F1 with Android 11

This guide helps you to enhance your android experience with LineageOS. We will share your complete guide alongside the download link. Even we also mention the requirements and steps to the installation process.

Get Ready to Install the ArrowOS 11

Your device must have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed LineageOS for POCO F1.

How to install ArrowOS 11 for POCO F1

We recommend you to an instant complete article before you install LineageOS on your POCO F1. So you would not face any problems while installing LineageOS.

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your POCO F1. You are responsible for any mistake and following flashing guide the files. Some functions don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Basic Pre-Requirements

  1. Enable the USB Debugging on your POCO F1.
  2. Download and Install Adb and Fastboot Driver: HOW TO INSTALL ADB AND FASTBOOT
  3. Then, Download and Manually Install Android USB Drivers on your PC

Downloads

Download ROM (ArrowOS 11)Download Here
Download TWRP RecoveryDownload Here

Note: Download Gapp Build ArrowOS 11. If you Download Vanilla builds, So you need to Download and Flash Gapps.

How to Unlock Bootloader on POCO F1

  1. Start with Enabling Developer mode On POCO F1
  2. Open the settings on your Mobile, and select “About.”
  3. Tap seven times on “Build number.”
  4. Go Back to Settings, And Search “Developer option,” and Open It.
  5. Now, Enable OEM Unlock and power Off your mobile.
  6. Now, open your smartphone into a Download mode by pressing and holding the volume down button and power button.
  7. Enter the following command to reboot into bootloader mode.
    “adb reboot bootloader.”
  8. Now perform the command below to unlock the bootloader of Any Lenovo Smartphone.
    “fastboot OEM unlock” Or “fastboot flashing unlock.”
  9. Now, press Volume Up to unlock the bootloader.
  10. After that, Restart your Mobile.

How to install TWRP on Smartphone

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using power off your device and then hold the Volume Down + Power button
  4. Now, Open the ADB folder on your PC and Laptop.
  5. Then, select the “Address Bar” in the ADB File and type “Cmd” after hitting the enter button. Alternatively, pressing Shift + Right Key and Select open Power shell Window Here.
  6. Now, follow these Command in Terminal
  • adb Reboot Bootloader
  • Fastboot Devices
  • Fastboot Flash Recovery “TWRP filename.img” and Hit Enter
  • Then After Type “Fastboot reboot” and Hit Enter.

Congratulations, you have successfully installed the TWRP File on Smartphone.

Here is the guide to follow the instructions:- Quick Guide 

  1. You need to Reboot your Device in TWRP Mode.
    BOOT MODES
    • For Recovery
      First, Power off your device, hold the Volume Down + Power button and then navigate using the volume rocker.
  2. In TWRP Mode, you need to Wipe cache, Data, and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, you have to reboot the recovery, or you might get an error/issue.)
  3. Now, Click Install and Navigate ArrowOS 11 custom ROM (Gapps Build).
  4. After Flash it on your devices, you need to Reboot your device once installations are successful.
  5. That’s it, and You can now enjoy ArrowOS 11.

Hopefully, We believe you have successfully installed the ArrowOS 11 Android 11 on your Poco F1How to Download and Install ArrowOS 11 based Android 11 on Poco F1 (Android 11). Thanks for being with us. Don’t forget to share the bugs, So we can share with developers to fix those issues in the comment section down below.