DotOS is a popular custom ROM and is supported by several devices across the globe. They are among the most popular firmware distribution communities that boost performance and deliver a stock Android. Today We Guide “Install DotOS for Motorola Moto G7 Play with Android R.”

Whereas if you wonder why we need a custom ROM if we already have the manufacturer’s OS. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Several people were excited to experience the latest Android Version.

DotOS finally extended the support for some new devices, including the Motorola Moto G7 Play. Today we will help you with this Complete guide to download and install DotOS for Motorola Moto G7 Play with Android 11.

Noteworthy: Dot OS for Motorola Moto G7 Play with Android 11

This guide helps you to enhance your android experience with LineageOS. We will share your complete guide alongside the download link. Even we also mention the requirements and steps to the installation process.

Get Ready to Install the DotOS on Motorola Moto G7 Play

Your device must have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed LineageOS for Motorola Moto G7 Play.

How to install DotOS for Motorola Moto G7 Play

We recommend you to an instant complete article before you install LineageOS on your Motorola Moto G7 Play. So you would not face any problems while installing LineageOS.

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Motorola Moto G7 Play. You are responsible for any mistake and following flashing guide the files. Some functions don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Check Your Smartphone Supports Project Treble

  • Download and Install the checks the compatibility of project treble. Download Here
  • Now, Run the app
  • If you are green in the test, then you are good to go.
  • Also, see if you are green for the seamless system update; otherwise, you cannot proceed to install this ROM.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Motorola Moto G7 Play.
  2. Download and Install Adb and Fastboot Driver: HOW TO INSTALL ADB AND FASTBOOT
  3. Then, Download and Manually Install Android USB Drivers on your PC

Downloads

Download ROM (DotOS)Download Here
Download TWRP RecoveryDownload Here
Download GappsRecommended: NikGApps
Generic Android 11 GApps for ARM64
NikGApps for Android 11 – ARM64
OpenGApps for Android 11 – ARM64
BiTGApps for Android 11 – ARM64

How to Unlock Bootloader on Motorola Moto G7 Play

  1. Start with Enabling Developer mode On Motorola Moto G7 Play
  2. Open the settings on your Mobile, and select “About.”
  3. Tap seven times on “Build number.”
  4. Go Back to Settings, And Search “Developer option,” and Open It.
  5. Now, Enable OEM Unlock and power Off your mobile.
  6. Now, open your smartphone into Download mode by pressing and holding the volume down button and power button.
  7. Enter the following command to reboot into bootloader mode.
    “adb reboot bootloader.”
  8. Now perform the command below to unlock the bootloader of Any Lenovo Smartphone.
    “fastboot OEM unlock” Or “fastboot flashing unlock.”
  9. Now, press Volume Up to unlock the bootloader.
  10. After that, Restart your Mobile.

How to install TWRP on Smartphone

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using power off your device and then hold the Volume Down + Power button
  4. Now, Open the ADB folder on your PC and Laptop.
  5. Then, select the “Address Bar” in the ADB File and type “Cmd” after hitting the enter button. Alternatively, pressing Shift + Right Key and Select open Power shell Window Here.
  6. Now, follow these Command in Terminal
  • adb Reboot Bootloader
  • Fastboot Devices
  • Fastboot Flash Recovery “TWRP.img”
  • Fastboot reboot

Congratulations, you have successfully installed the TWRP File on your Smartphone.

Here is the guide to follow the instructions:- Quick Guide 

  1. You need to Reboot your Device in TWRP Mode.
    BOOT MODES
    • For Recovery
      First, Power off your device, hold the Volume Down + Power button and then navigate using the volume rocker.
  2. In TWRP Mode, you need to Wipe cache, Data, and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, you have to reboot the recovery, or you might get an error/issue.)
  3. Now, Click Install and Navigate DotOS custom ROM After Flash it on your devices.
  4. Now, follow the same steps to install GApps on your device.
  5. Reboot your device once installations are successful.
  6. That’s it, and You can now enjoy the DotOS.

Hopefully, We believe you have successfully installed DotOS on your Motorola Moto G7 Play. Thanks for being with us. Don’t forget to share the bugs, so we can share with developers to fix those issues in the comment section below.